WTB 1966-1969 B-body 11" front disc studs

[tribe_of_dan]

Looking for 10 good studs for 1966-1969 B-body 1/2" studs for 11" front disc brakes.

Thanks

 

[hemi71x]

https://sacramento.craigslist.org/pts/6086280107.html

My friend has 5 of the "lefties"
Contact him.

 

[tribe_of_dan]

Thanks, I should have been clearer. Looks for 10 Right hand. I found 7 on eBay so I still need a few.

Best I can tell is they were Dorman Part number 610-136. They are now out of production and I have tried RockAuto, AutZone, Advanced Auto and NAPA. No dice.

Might need to pull some from an old vehicle.

 

[tribe_of_dan]

Bump.

I found 7 on EBay. Just need 3 now.

 

[xtraoldestocke]

I likely have a few. I can check my nuts and bolts containers tmrw.

 

[tribe_of_dan]

Thanks for your help!

 

[NJRR]

I likely have a few. I can check my nuts and bolts containers tmrw.

Sorry to hijack the thread, but I need 5 Right Hand rear 10" drum studs for a 70 Satellite. Anyone have or know a part number?

 

[tribe_of_dan]

Sorry to hijack the thread, but I need 5 Right Hand rear 10" drum studs for a 70 Satellite. Anyone have or know a part number?

Tried Rock Auto?
http://www.rockauto.com/en/moreinfo.php?pk=299772&cc=1240962&jnid=359&jpid=5

 

[tribe_of_dan]

I likely have a few. I can check my nuts and bolts containers tmrw.

Any luck xtraoldstock?

 

[xtraoldestocke]

Any luck xtraoldstock?

Bad news is I found lh thread. Possible good news, I found two sets of rotors. I will check with a friend I have who works at Dodge and is pretty good at finding stuff like this. Otherwise I'll take a few off one of the rotors.

 

[xtraoldestocke]

Bad news is I found lh thread. Possible good news, I found two sets of rotors. I will check with a friend I have who works at Dodge and is pretty good at finding stuff like this. Otherwise I'll take a few off one of the rotors.

My buddy found 5 so I ordered them.

 

[tribe_of_dan]

Update. Turns out the above weren't the correct 1966-1969 B-body 1/2" studs for 11" front disc brakes.

I got 7 from eBay and needed another 3. After trying NAPA, AutoZone, Advanced Auto... my local car quest had 5 in stock so I nabbed them. They look lightly different than the ones I have but very close.

I may end up with two spare if anyone needs them.

 

[mobileparts]

At this moment in time -- I have EVERY wheel stud in the Mopar world -- "B" & "E" Body, "A" Body, and "C" Body -- Drum and Disc for all ---
and Righties and Lefties for all ---- although some lefties are getting very low in quantity.......