• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1966 belvedere front bumper

Status
Not open for further replies.

l smith

New Member
Local time
6:51 PM
Joined
Jun 9, 2013
Messages
2
Reaction score
0
Location
ohio
Feedback: 0 / 0 / 0
looking for a 1966 belvedere front bumper
 
I have a 67 R/T front with turn signals and can't remember if they are the same as 66, if you can use it LMK. Thanks, al.
 
Hi,
I've got a 1966 Belvedere II bumper. It's got some dents. If you PM I could send pictures.

Joel
 
Don't know if this will help but I did find this. Pricey but they are for the 1966 Satellite/Belvedere models. The 67 mentioned will work but the turn signals for the 66 are in the Grill Assembly where the 67's are in the bumper. Good luck in the search....cr8crshr/Tuck
 
Dodge and Plymouth bumpers are NOT the same.

cr8 is correct the 67 will work, but has holes for the marker/turn signal lights.

You could put driving light or fog lights in them...

I know where a fairly nice 66 bumper is down here but it's an hour drive each way, and my gas/time plus the shipping would probably be too much.

- - - Updated - - -

Sometimes I don't know what my brother is thinking....

We found a 66 4D at the U-pull, and the bumper was about 15% nicer than the one he had.

He bought the bumper for $50 (I think), and then GAVE them his for the $20 core???

He could have easily sold it for $50 and been even, plus a decent 66 Plymouth bumper is now going to scrap.
 
I have a 66 plmouth thats recromed and is verry nice $ 375 plus the shipping .
going to carlie on thr moring can bring
 
Status
Not open for further replies.
Auto Transport Service
Back
Top