• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

1969 dodge charger seat belts

paul1969cars

Well-Known Member
Local time
3:16 AM
Joined
Jan 10, 2023
Messages
223
Reaction score
43
Location
new york
Hi all

So I had my seat belts restored. Came out awesome

I never had the upper belts above the doors. Prior owner removed them

My question is

Do both sides of car get these snaps to hold the elastic of the belt to the roof?

and is there coat hangers on both sides of the car or only 1 side?

I dont know

Thanks

20230425_141036.jpg
IMG_5008.jpg
 
Seat belts look good who did them, not able to make out card.
 
Here's the positioning of the male snap and the coat hook. They will be the same on either side. I don't remember the snaps being anything special.

IMG_20221211_175235424.jpg
 
thanks

I assume that male snap is held by a center screw of some sort?

The seatbelts were done by sharons web in texas. Met her in carisle. Did a nice job. not cheap
 
Yes, the snap is fastened by a small Phillips screw. I'll take one out and measure it tomorrow.

And it's tomorrow... and, of course, I was partially wrong...the screw is "captive" and non-removable. You could easily get a male snap and drill out the facing hole, if the screw head is too big.

20240111_121502~2.jpg


20240111_121532~2.jpg
 
Last edited:
Auto Transport Service
Back
Top