• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND 1970 Coronet R/T Strut rod

Status
Not open for further replies.

DasFusca

Well-Known Member
Local time
4:12 AM
Joined
Aug 15, 2011
Messages
296
Reaction score
408
Location
Southern New Jersey
Feedback: 1 / 0 / 0
One of my Strut rods has a noticeable slight bend in it while the other appears to be straight. I am guessing a tow truck did damage to this and the brackets that hold the stabilizer bar because they are bent on that side too.

I am rebuilding the entire front end and did not want to put any bent parts back on.

I am looking for a nice straight strut rod. Its on the passenger side. I don't think that matters. I am not sure the high performance (R/T) cars had a different rod from the factory.
It's a 1970 big block k-member.

I only need one. let me know if anyone has one and how much. shipping to 08081.

Thanks,
Martin
 
One of my Strut rods has a noticeable slight bend in it while the other appears to be straight. I am guessing a tow truck did damage to this and the brackets that hold the stabilizer bar because they are bent on that side too.

I am rebuilding the entire front end and did not want to put any bent parts back on.

I am looking for a nice straight strut rod. Its on the passenger side. I don't think that matters. I am not sure the high performance (R/T) cars had a different rod from the factory.
It's a 1970 big block k-member.

I only need one. let me know if anyone has one and how much. shipping to 08081.

Thanks,
Martin
Had the same thing on my 69 Bee, one was bent. I ended up buying a new pair, but kept the good one. Pretty certain it is the same as a 1970 model. About .720 diameter in the middle, 22 3/8" long overall, 17 9/16" shoulder to shoulder. Car was from California, so is decent. $15 + shipping if you are interested.

20201204_133709.jpg 20201204_133724.jpg 20201204_133717.jpg
 
Sounds good. I'll pm you my address.
Thanks, its exactly what I needed.
Martin
Had the same thing on my 69 Bee, one was bent. I ended up buying a new pair, but kept the good one. Pretty certain it is the same as a 1970 model. About .720 diameter in the middle, 22 3/8" long overall, 17 9/16" shoulder to shoulder. Car was from California, so is decent. $15 + shipping if you are interested.

View attachment 1035617 View attachment 1035618 View attachment 1035619
 
Status
Not open for further replies.
Auto Transport Service
Back
Top