torredcuda
Well-Known Member
I need a lower passenger side trim piece fit a road runner '70 as some previous owner drilled a hole in mine. Shipped to 03825 New Hampshire
WTB 1970 road runner rear window trim
- Thread starter torredcuda
- Start date
- Status
- Local time
- 8:22 AM
- Joined
- Jan 29, 2018
- Messages
- 19,459
- Reaction score
- 63,708
- Location
- Midland Ontario, Canada
Mine were both that way from a glass shop that couldn't get my trim to stay down.
When I sent my trim out for polish they welded up the holes with TIG and polished it out. You'd never know it was done.
When I sent my trim out for polish they welded up the holes with TIG and polished it out. You'd never know it was done.
- Local time
- 5:22 AM
- Joined
- Mar 14, 2012
- Messages
- 17,052
- Reaction score
- 28,528
- Location
- Surrey, B.C. Canada
You can solder up the holes and polish them so they shine just like the stainless. You need a special acid stainless flux and silver solder.
- Status
Similar threads
- Locked
- Locked
