Schober Motorsports
Well-Known Member
Contact seller
3/8 Manton Pushrods
Unknown the exact wall thickness these, bought them a few years ago
Used these w/ Hughes Whiplash cam, handled the springs without any issue.
5/16 ball and 5/16 Cup
Used with a hydraulic flat tappet and 440 Source Roller Rockers (Might work with roller hyd cam depending on length needed)
Measured length is 9.000 as pictured. Payed $220 originally for these, going to a solid lifter cam and these are a bit too short.
Any questions feel free to contact,
Located in Freeport, FL 32439
$170 SHIPPED
Thanks, Craig
Unknown the exact wall thickness these, bought them a few years ago
Used these w/ Hughes Whiplash cam, handled the springs without any issue.
5/16 ball and 5/16 Cup
Used with a hydraulic flat tappet and 440 Source Roller Rockers (Might work with roller hyd cam depending on length needed)
Measured length is 9.000 as pictured. Payed $220 originally for these, going to a solid lifter cam and these are a bit too short.
Any questions feel free to contact,
Located in Freeport, FL 32439
$170 SHIPPED
Thanks, Craig