3/*" sending unit anyone use them? They all seem to have a return line?

[bigmanjbmopar]

Was looking at new sending units since mine now only reads full when gas is at the top of the filler neck lol Have a 3/8" line from tank to pump but when looking at all the senders out there that are 3/8" they all seem to have a return line built on? Do you just cap each end if your not going to run a return? Guess I should get the separator and run a return may help. Any 3/*"units out there with out a return?

 

[bigblock]

I have one,I got it at NAPA. You will be better off with the return line anyway in the future. Just plug it for now.

 

[440beep]

Yes, but its a 66-67 sending unit, and the sending unit's layout (piping, float) is a little different than the 68-70 units.