- Local time
- 4:20 AM
- Joined
- Dec 23, 2009
- Messages
- 3,944
- Reaction score
- 5,076
- Location
- Rancho Cordova, CA
This is a 3 spoke power steering pump pulley that is used on the FEDERAL power steering pumps.
It's the PRESS on style on the pump shaft, with the .625, 5/8 inch, diameter shaft.
I guess it could also be used on a TRW pump, but you need to check on the shaft diameter, that i have listed.
I cleaned it up, then soaked it in a pail of Evaporust, back to bare metal condition, then painted it up.
It's in great shape, not twisted, or bent up, ready to be used again.
Selling at $60.00 and $15.00 for the mailman, to your zip code.
Cheaper than what repop ones are priced at.
Interested?? Send me a pm.
Thank's a lot.
Jim V.
hemi71x
It's the PRESS on style on the pump shaft, with the .625, 5/8 inch, diameter shaft.
I guess it could also be used on a TRW pump, but you need to check on the shaft diameter, that i have listed.
I cleaned it up, then soaked it in a pail of Evaporust, back to bare metal condition, then painted it up.
It's in great shape, not twisted, or bent up, ready to be used again.
Selling at $60.00 and $15.00 for the mailman, to your zip code.
Cheaper than what repop ones are priced at.
Interested?? Send me a pm.
Thank's a lot.
Jim V.
hemi71x
