• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

318 Poly AC Intake Manifold Vacuum Coupling?

VFilms

Well-Known Member
Local time
2:32 PM
Joined
Nov 12, 2014
Messages
1,420
Reaction score
2,745
Location
Saratoga NY
Circled is the vacuum coupling that attaches to the back of the intake manifold on my 318 Poly. The larger hose goes to the brake booster and the smaller hose (with the arrow) goes to the AC controls. The smaller nipple has broken off this coupling. If anyone has one they want to sell or knows where I can find one I'd appreciate hearing from you.
vac coupling.jpg
 
A picture of the broken piece would be much more helpful.
 
Braze it back on... You could also drill a hole where the nipple was, and put a longer tube in it, then braze that in place.
 
Dryheat,
Thanks very much. I bought it. Just what I needed.
Thanks again.
Mick
 
Auto Transport Service
Back
Top