chickendeluxe
Well-Known Member
Big MoPower platform available.
I realize that I’m not going to build this so time to let go after 20+ years.
1990's Vintage, Former Barton Built 4.500 Mopar Siamese Bore Mega *Water Block-
bores currently 4.501-.503.
*Had been reworked by Barton once and lifter bores bushed....
*I had Checked out by Burtonsville Machine. (see card)….
.......My pistons they measured didn’t work with this, so I stopped.
* those pistons that were spec’s were sold since they were not compatible. No pistons or Rods w this sale.
2000's Velasco Premium Top Fuel 4.500 Stroke 2.375 Mopar Rod Pin Crank- Fresh... bought after serviced. See note of authentication from Henry Velasco. 2850 Gram Bob Weight
Vintage 1968 (per Herb McCandless) Magnesium Cross Ram with correct 90's Repop Holley 780's, adaptor plates and Stacks I bought carbs and Stacks new from Chrysler in mid 90's..
Have most linkage, Fuel Lines and Hood Seal Plate I have for my 1968 Super Stock (BO) Style Hemi Barracuda, too.
Nice collection of parts to get your 900-1000 horse project going.
$14,995 or may trade for decent NO EGR or DEF diesel Hauler
BO LO Hemi Dart 426 Hemi 472 511 512 528 572
I realize that I’m not going to build this so time to let go after 20+ years.
1990's Vintage, Former Barton Built 4.500 Mopar Siamese Bore Mega *Water Block-
bores currently 4.501-.503.
*Had been reworked by Barton once and lifter bores bushed....
*I had Checked out by Burtonsville Machine. (see card)….
.......My pistons they measured didn’t work with this, so I stopped.
* those pistons that were spec’s were sold since they were not compatible. No pistons or Rods w this sale.
2000's Velasco Premium Top Fuel 4.500 Stroke 2.375 Mopar Rod Pin Crank- Fresh... bought after serviced. See note of authentication from Henry Velasco. 2850 Gram Bob Weight
Vintage 1968 (per Herb McCandless) Magnesium Cross Ram with correct 90's Repop Holley 780's, adaptor plates and Stacks I bought carbs and Stacks new from Chrysler in mid 90's..
Have most linkage, Fuel Lines and Hood Seal Plate I have for my 1968 Super Stock (BO) Style Hemi Barracuda, too.
Nice collection of parts to get your 900-1000 horse project going.
$14,995 or may trade for decent NO EGR or DEF diesel Hauler
BO LO Hemi Dart 426 Hemi 472 511 512 528 572
