400 big block?

[69charger]

anybody willing to part with one?

in or near Houston?

 

[69charger]

Okay does anybody ANYWHERE have one?
if you're willing to ship of course.

 

[daniel_depetro]

I have one I tore apart. I am not sure what is still laying around anymore. It was a complete engine, however I think I tossed the pistons/rods. I am not sure what I did with the crank either (it may still be there). I know for sure the block, heads, and intake are still there.

$125.00 and I'll strap it to a pallet and you can have your carrier pick it up.

 

[generalsnbandits]

I have one in Georgia, Complete motor carb to pan. I have offered it for sale locally for $450. I can prepare it for your shipper. Last time I quoted something it was incorrect. I shipped an 7 1/4 rear end to El Paso earlier this year for $150. Not sure about cost to ship motor. Pay for gas and I could get it to Meridian Miss. for you sometime in the near future. Houston to Atlanta is pretty far away unless you know someone coming this way. Anyway let me know if the deal with daniel depetro. Thanks! generalsnbandits. [email protected]

 

[daredevil]

i,ve got a 440 block here in houston unbored i bought to build but may be a while.I need the crank but may sell the block.what are your plans?

 

[69charger]

thanks all but I just bought one this past sunday in Hempstead, it's about an hours drive away.

my plans are to do a 470 stroker with either an Indy rotating assembly or a 440 source one the indy one is cheaper right now but I dont know if it's balanced and also how long the price is gonna last.
as far as heads go I think i'm gonna run some Stealth Heads from 440 source and I dont know what i'm gonna do for the intake, a part of me wants to get a six pack but...i'll probably just end up going with a 4bbl

 

[daredevil]

Im always a day late

 

[daredevil]

who does your machine work

 

[69charger]

well nobody at the moment.
but this guy recommended Chris at Motor City Engines.
so I think I'm gonna check them out.

what about you who does your work?

 

[daredevil]

Guy named Cruz Guzman in Rosenberg. He does all the machining for Diamondback Racing engines and they talk Mopar. Nice guy too. if you want to talk to him his # is 2813440066,tell him Pete reffered ya. Or if you want to drop by on sat. mornings we grab breakfast.