64 b body 3sp column

[64copcar]

Looking for a 3 speed steering column for a 64 dodge 330 with manual steering.Thanks

 

[moparker]

I have a floor shift column from a 65 Satellite. I don't know if it is from a manual or power steering unit. Let me know if you are interested. I'm in Ohio.

 

[64copcar]

Thanks but I am needing a 3sp column shifted , manual box column. I was unclear on that I guess.

 

[jld440]

I have one from a 63 plymouth but its for a power steering car.I am not sure if a 63 will fit a 64 car also I have the trans. and all the linkage as it is still in the car if you need any thing let me know I am going to part it out.

 

[kdtjb]

PM sent

 

[64copcar]

Don't know if 63 will work. Does anybody know if it will? Thanks

 

[brandon64]

Don't know if 63 will work. Does anybody know if it will? Thanks

62-65 should be the same, but a power column will be too short for your manual box.

 

[64copcar]

How much difference is there in the the length?

 

[brandon64]

How much difference is there in the the length?

Power on left, manual on right.

 

[64copcar]

Thanks for taking time to post picture.Do you still have 2 dr hardtop car.

 

[brandon64]

Thanks for taking time to post picture.Do you still have 2 dr hardtop car.

I thought you were the guy I talked to while ago. hard top car was too far gone to save, I'm turning the 4 door into a 2 door with the hard top parts. ( see thread)

http://www.forbbodiesonly.com/moparforum/showthread.php?t=26525

I do still have an 8 3/4 with the leafs if you still need it. (out of hdtp car)

 

[64copcar]

Yeah got busy lost your number then started seeing your posts on here. Glad to see you doing the conversion,going to be really nice. Anyway I found a rearend since then and trying to pick up some parts. Got some damage to left rear quarter didn't know if you would want to get rid of that section of body. You still living where you were? Thanks

 

[brandon64]

I have a few pieces you might be able to use, Ill PM you my new contact info.

 

[kdtjb]

steering colunm

Tried to send these pictures in a PM but couldn't. So here they are.

 

[moparmarks]

I have one from a 64 Polara
PM me if interested.
Thanks

 

[moparsteve636]

P>M. sent

 

[64copcar]

I want to thank everyone who responded to this post. I did get a column from a member.I appreciate everybody's help. Steve