FOR SALE 64 Plymouth Belvedere with a 6.4 Hemi

[19 69 GTX]

Up for grabs is my 64 Plymouth Belvedere with a 6.4 Hemi with TTI headers and a fresh 727 trans with a reverse manual valve body. Has a 8 3/4 with a brand new Yukon 489 case with a 3.90 gear. Also has new axles with green bearings from Dr. Diff. New rear super stock leaf springs, new hangers and front brackets. New shocks on all four corners. Has Aeromotive fuel injection tank as well. Still as manual drum brakes on it and front needs new drums. Has new A100 seats made by Gary Ball and his aluminum brackets. Custom gauages and a working fuel gauge . Car is very solid body overall with original panels and good trunk. Will need floor patches on drivers side front and back. Needs some interior work like headliner and some door panels work. I do have a headliner already not installed. Car needs front suspension work like ball joints and control arm bushings. Its very reliable as ive drove it a lot even 150 mile round trip. Got 17 mpg not bad for 500 hp. It really fun to drive and hauls ***. Headlights , tail lights and brake lights work. Im at 19k firm no trades. Located in Terre Haute , Indiana

 

[MarPar]

Underneath, back seat and trunk pics?

 

[19 69 GTX]

Underneath, back seat and trunk pics?

 

[19 69 GTX]

Don't expect a show car for 19k a Gen 3 Hemi swapped car. Under car is good and frame and trans cross all good. Needs floor board work drivers side front and back.

 

[RemCharger]

It's a factory computer and tune?

 

[19 69 GTX]

Yes its a kit from Sublime Technologies and uses the factory harness and factory ecm. Fans and radiator are out of donor car. They come on via factory ecm . Ive done 5 swaps so very familiar with it.