• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

FOUND 66-67 Plymouth rear panel need

Status
Not open for further replies.

blewbyu

Well-Known Member
Local time
1:57 AM
Joined
Dec 28, 2012
Messages
809
Reaction score
301
Location
Florida
Feedback: 11 / 1 / 0
I need the lower panel that runs completely across the lower rear if you have one you can cut off a car that isn't rusty PM me. See pic of what i need circled in red.

67 plymouth rear panel.JPG
 
I had the same problem and couldn't find a replacement so I ended up fabricating my own.
 
Yup your going to have to make your own or find someone parting out a car that’s willing to cut the panel you need good luck on your project
 
I may have one. Give me a few days to look.
 
Are we talking about the plastic filler(s)

Mine have a little shrinkage and one has a warped spot that might go back down, but are clean and all there.

IMG_20180508_183154.jpg
IMG_20180508_183203.jpg
IMG_20180508_183231.jpg
 
I want to thank YY1 for his help. He was sort close to me and allowed me to come over and remove the piece I need.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top