• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD 66-68 Automatic "B"/"C" body consoles/plates

Status
Not open for further replies.

YoungGun87

FBBO Gold Member
FBBO Gold Member
Local time
10:54 AM
Joined
Feb 28, 2022
Messages
711
Reaction score
917
Location
Fitzgerald, Ga
Feedback: 14 / 0 / 0
Contact seller
Very nice driver quality console chrome/ribbed top plates, end plate, lights w/lenses, trim, door hinge, and mounting plate w/ all hardware minus 1 screw and flat nut for a light. These came off the broken red, 2 piece console. Believed to work in B and C bodies from 66-70. If your gripe is about the woodgrain tops in 69-71, they sell the woodgrain top covers for around $87.

All 3 consoles are for automatics.
The black one, I've found pictures of 69 Polaras and 69 Sport Fury's that have the seatbelt clips, one piece body, and the black outer ring on the top plates w/ the smooth chrome/argent center. It has the wiring harness with it, lights, trim, top plates, door lock button, and a one year only 1966 Chrysler end plate w/ a lighter and courtesy light(rare piece). I believe it just needs the rear mount for the end plate and a 3-4 inch crack fixed in between the seat belt clips.

Both red consoles are the 2 piece body. 66-68(70?) Chargers, Coronets, etc.
The better red one will need the driver side center top plate mounting tab re-glassed(it's barely hanging on but still attached) and a good paintjob. One little chip missing from the very front bottom. The rear metal mount needs to be blasted or evaporust dipped then some light repair but it's still good and functional.

The broken red console originally just had the front section broken off and the chrome plates/rear piece are from this console. I was attempting to move it and the passenger side broke off from the light forward. All 3 consoles are believed to be originals and not repro's which is why I don't want to throw any of it away. It can all be fixed, imo, by a good fiberglass guy.

Our plan was to use the black console w/ chrome plates and put the other plates on the good red console to sell but our car already has the 4-speed hump so we're going bucket seats/no console and selling them all. I would like to keep the good red console and chrome plates complete because it would make a good, complete setup.

Black console - $750 + shipping
Good red console with end piece and steel brackets- $250 + shipping
Everything in pic 1, top/end plates, trim, lights - $600 + shipping
Broken red console - $40 + shipping
I'll let everything in the pics go for $1499 + shipping.
31750 zip. Paypal Friends & Family preferred (doesn't charge fees that way) or add 4% to prices + shipping.

20220311_191309.jpg 20220311_191331.jpg 20220311_191339.jpg 20220311_191402.jpg 20220311_191411.jpg 20220311_191418.jpg 20220311_191428.jpg 20220311_191503.jpg 20220311_191525.jpg 20220311_191533.jpg
 
Last edited:
Black console - $600 + shipping
Good red console with end piece and steel brackets- $150 + shipping
Everything in pic 1, top/end plates, trim, lights, hinge - $500 + shipping
Broken red console - $30 + shipping
Everything for $1150 + shipping.
 
Last edited:
Status
Not open for further replies.
Auto Transport Service
Back
Top