WTB 67 Coronet 1/4 panel R/T emblems

[barracuda400]

Hi,
looking for a nice pair of R/T quarter panel emblems for my restored numbers matching 440 car. I know they are hard to find. Thanks for your offers.

 

[1 Wild R/T]

Considering it's the same emblem as a 69 it shouldn't be hard to find.... I know there are decent reproductions... NOS is likely scarce...

 

[69L48Z27]

Considering it's the same emblem as a 69 it shouldn't be hard to find.... I know there are decent reproductions... NOS is likely scarce...

Don’t believe it is. The later part number does not have the correct contour.

 

[1 Wild R/T]

Don’t believe it is. The later part number does not have the correct contour.

The 68 is curved, the 67 & 69 have the defined bend... Same part... Trust me, I have a 68 & was sold NOS 67/69 emblems as 68's... I took the time to learn the part numbers.... Forgotten them since but 67/9 are the same...
Eventually I traded the NOS 67/9 emblems for something I needed for my 68....

 

[1 Wild R/T]

https://www.ebay.com/itm/265081557836

 

[QuickBpBp]

Considering it's the same emblem as a 69 it shouldn't be hard to find.... I know there are decent reproductions... NOS is likely scarce...

A Guy at The Mopar Nats had Trays full of them ALL NOS Painted and Unpainted.. If I remember it was the original owner of Metro parts. He purchased a large amount of emblems that a casting company had in Tractor Trailer bodies sitting in bulk for decades.. Painted were $25 each and Unpainted were $20 each... Someone here may have grabbed his number I only grabbed a 68 R/T grille emblem..

 

[1 Wild R/T]

After doing some internet searching it seems 69L48Z27 is correct the 67 emblem is different, Chrysler superseded to the 69 part number way back in the 70's so the 69 number has been the standard replacement for 40+ years... but the correct 67 part has a sharper bend than the 69 part... Some guys have had success bending the 69 emblem, apparently the letters bend ok but the center slash tends to crack...

Real 67's don't exist & replated originals sell for upwards of $1000 each...

 

[barracuda400]

Yes, did the same research. I do have a pair of the 69s and they do not fit at all. Like you've mentioned, the bend is not correct. If there is nothing for sale will try to heat and bend.

 

[Matt M]

Try them
rt specialties online
They had a few sets a while back.

 

[Part Stalker]

I found this in my box of NOS emblems and even the old FBBO articles say it is a 67. Part number is 2839636. Here are some pictures with the last next to the 69 (on left) 2901812 emblem so you can see the curve difference.

 

[barracuda400]

Are the 67's with 2839636 for sale?