WTB 67 Coronet Wheel Lip Molding 2586063

[1carlover]

Looking for a r/r stainless wheel lip molding that does not have to be sent out for straightening.

 

[69L48Z27]

Let me know if you find two.

 

[FU64RY]

I HAVE 2 BUT DO NOT REMEMBER IF THEY WERE F OR R
Picture?

 

[FU64RY]

Let me know if you find two.

Since you are so close why not stop here and see if they are the ones you need.
Steve

 

[1carlover]

Since you are so close why not stop here and see if they are the ones you need.
Steve

Sorry was out of town but would like to see what you have. York is relatively close but almost an 1 1/2 hr drive.

 

[1carlover]

Hey is there any chance you could send me a couple of pictures of the moldings. I would definitely take a ride to check them out if they are correct for

No email addresses here as per rules.

 

[FU64RY]

I'll put it one my to do list.....but just too damn cold to get them out just now.

 

[FU64RY]

I HAVE 2 BUT DO NOT REMEMBER IF THEY WERE F OR R
Picture?

Just got them out they look to b fronts. Sorry. $40 + the ride if anybody want's them. very straight with minor inside corrosion.

 

[joe smith]

I have a complete set plus two ( not sure if the two are front or backs) I have been hoarding for 20 years.. Let me pull them out and lookover exactly what I have..

 

[1carlover]

I have a complete set plus two ( not sure if the two are front or backs) I have been hoarding for 20 years.. Let me pull them out and lookover exactly what I have..

Joe I would be interested in them if.they are backs and would like to see what the set looks like.

 

[joe smith]

Give me a few days to pull em out and look em over.....

 

[joe smith]

Still working on it... Computer took a dump and its been cold here.... I want to clean em up and take some pics of what I have.... Few more days please..

 

[69L48Z27]

Cold in FL? I guess it's all relative.

 

[chignikred]

York PA, the home of refrigeration York compressors. You be chilling for years.