• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

67 GTX License Plate Light Assembly Missing

Bob Lynch

Well-Known Member
Local time
5:30 PM
Joined
Mar 23, 2022
Messages
236
Reaction score
440
Location
Foothill Ranch, CA
Hello:
Can someone take a picture of the stock rear License Plate Light Assembly
so I can see what it looks like?
I see the 2 mounting holes in the bumper for it.
I'm seeing several different sizes and shapes out there.
I'd like to get the stock version if possible.
Does anyone have a link for a seller?

Thanks,
Bob
 
Hello:
Can someone take a picture of the stock rear License Plate Light Assembly
so I can see what it looks like?
I see the 2 mounting holes in the bumper for it.
I'm seeing several different sizes and shapes out there.
I'd like to get the stock version if possible.
Does anyone have a link for a seller?

Thanks,
Bob
All 66-7 Plymouth b bodies will be the same, and also Dodge I think.
 
Dodge Coronet is totally different. See photo, Plymouth is flat and rectangle shaped, and it mounts in a different place.

CFA4ADF9-FA0E-49FC-A13C-38C9E71B2355.jpeg 5000EF8F-A781-44DF-932A-51D1C3E85D37.jpeg
 
Last edited:
This is a 66-67 Belvedere license light. Goes above the plate, two tabs on the bumper with holes, screws thread into the light housing.

E2C50E8F-12F1-4760-A0A0-1628AE867DBC.jpeg E7AFA09C-0C83-4314-A4EA-07AC87F6D08A.jpeg
 
They fit many chrycos from 64-74.
 
Auto Transport Service
Back
Top