SOLD 70 440 Engine parts needed

[PlumcrazyRR]

OK, here we go with my dream list for this paycheck. Looking for a crankshaft pulley, single groove and water pump pulley single groove. This is for a no AC, no PS, 1970 440 RR. Looking for one with no pitting. Does not have to be painted, just no pitting.

Also looking for the complete alternator bracket mounting kit for the same car. Same as above, looking for one with no pitting. Yes, I know I can pick this stuff up for about $140-ish repopped, but every dollar saved can go to something else.

On a side note. If anyone has any of the following items new sitting around collecting dust, I may be interested;Blaster 2 coil, MP water pump, mechanical fuel pump.

Thank you to all!

WP pulley- found
Alternator Bracket Mounting set- found
Fuel pump- found

 

[valleyson_69]

Good Evening Plumcrazy....I am sure I can help locate any parts needed for your 440. A friend has about 200 Mopar's ranging from 1950's thru 1977 .

 

[PlumcrazyRR]

Update:
Just in need of the crank pulley, coil, and water pump now.

Made a call to a buddy and he was able to track down some parts and spend most of my paycheck that was not spent on bills on car parts I needed. He was nice enough to leave me a little, so I can buy a few more parts, so I don't go into withdrawals having to wait until my next paycheck.

 

[PlumcrazyRR]

Update:
Just looking for the crank pulley and water pump now. Mainly the single groove crank pulley for my 70RR with 440. I have the water pump housing. What I am looking for is a high flow water pump center section to replace the original.