489 housing with caps, adjusters, and locks. I had this blasted, then washed it in my buddy's trans case washing machine, but I never built this case. That's why it has some light surface rust.
Lightly used Richmond 4.10 ring and pinion. This has very low miles on it, probably less than 500 mi. I put this in my car in the mid-80's, but only used it for a little bit before pulling the car apart. When I put the car back together, I used another gear set.
Course spline yoke for 7290 u-joints. This fits the pinion from the 4.10 gear set.
Complete open carrier. No damage, no pitting on the spider gears, ready to drop in.
New carrier bearings. These were in their original Mopar boxes. I took them out when I was going to build this unit. I threw the boxes out, then changed my mind and built a different unit and used different bearings, but these are unused.
New set of ring gear bolts.
Local pickup only in 60134 zip code, far west suburbs of Chicago. $200 for everything. I'm sorry, I don't have a sure grip for this. If you're interested, please send me a message. Thank you. If you need better pictures of something, please let me know, and I'll do my best to get a better picture of what you want.
Lightly used Richmond 4.10 ring and pinion. This has very low miles on it, probably less than 500 mi. I put this in my car in the mid-80's, but only used it for a little bit before pulling the car apart. When I put the car back together, I used another gear set.
Course spline yoke for 7290 u-joints. This fits the pinion from the 4.10 gear set.
Complete open carrier. No damage, no pitting on the spider gears, ready to drop in.
New carrier bearings. These were in their original Mopar boxes. I took them out when I was going to build this unit. I threw the boxes out, then changed my mind and built a different unit and used different bearings, but these are unused.
New set of ring gear bolts.
Local pickup only in 60134 zip code, far west suburbs of Chicago. $200 for everything. I'm sorry, I don't have a sure grip for this. If you're interested, please send me a message. Thank you. If you need better pictures of something, please let me know, and I'll do my best to get a better picture of what you want.
