• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

AMD Bumper / Bumper Bracket Doesn’t Fit

69 GeeTeeX

Well-Known Member
Local time
11:56 PM
Joined
Apr 26, 2020
Messages
225
Reaction score
307
Location
Michigan
1968-1969 Plymouth B-body AMD front bumper brackets and bumper don’t fit together. These are supposed to be Chrysler authorized restoration parts, yeah right. That doesn’t mean ****. I came across this problem about 2 1/2 years ago and worked with Zach at AMD to understand and fix the problem with their parts. He said it would be fixed but takes time. Guess 2 1/2 years isn’t long enough... I needed another set for one of the cars in my shop and figured they would have the problem fixed, no worries. Nope still selling the same old ****. Calling and sending back Monday morning! I’m sure they’ll have some excuse since they’re made in Taiwan.

Anyone else run into this problem?

E80B9A36-087A-480B-896E-8BCA2C8FEBD2.jpeg A2D9F717-B1DC-4F06-9D9C-D4E4C2133F9F.jpeg 9F3B8492-7719-48BC-8E0E-9F7C194EC83A.jpeg E54E02FB-70B8-4C95-8E2E-080D08E7F416.jpeg 88895AB1-3083-4F90-816E-F462C3D14E1B.jpeg
 
My '69 Bee support brackets where exact to OE other than the part number font is slightly wrong. 40 years from now with all these reproduced part #'s out there guys will think that they bought an OE survivor... lol
beerestoration2019 1264.JPG
beerestoration2019 1267.JPG
beerestoration2019 1268.JPG
beerestoration2019 1269.JPG
beerestoration2019 1784.JPG
 
Recently (2 months ago), order and received front bumper and brackets, and also rear bumper. Fit was almost perfect, centered good, correct length fitting close to the body. Chrome quality was really good also. Yes, they were AMD. I wouldn't hesitate to order again if I needed. OH, for my 1968 Roadrunner.
PT in Tennessee
 
Auto Transport Service
Back
Top