Moparparts
Well-Known Member
FOR SALE: Here are the pics of 3 sets of back up lights for a 69 Plymouth Road Runner, GTX, Sport Satellite, or Belvedere to choose from. These are not correct for Charger, but I have those available as well. PM if interested. I also have the half moon retainers with screws available, if you need them for $18 a set, and they have been buffed. All three sets of lights were hand cleaned, refinished satin aluminum inside and satin black on the back side. They all have good crack free lenses, which BTW for those who would want to know, the lenses are the extrude the bezel ones.
THIS SET IS SOLD[/B] #1 back up lamp set has dent and ding free stainless bezels that have been buffed for show. Lenses are very nice, and internal sockets are good. The pigtails are not damaged, but the back side of the housings have pitting, and 1 socket has some small rust holes. These holes came from the surface rust outside. You may be able to use it as is, and just seal those small holes with sealer, or repair them with weld. $65 plus shipping for this set.
#2 does have some very small dents on the stainless bezel of one and rub indent marks on the other one. The internal and external housings are in nice used condition. The sockets and pigtails are nice and undamaged. $60 plus shipping for this set.
#3 stainless bezels are decent with only a notable ding on one and small imperfections on the other. The internal sockets appear to be OK on both, but one has part of the flange piece missing, although it stays in place as is. It also has the boot for the pigtail rolled back, and will need some heat applied and rerolled back on. The other one in this set has a good crack in the socket boot and wire insulation on the pigtail. Both lens gaskets for this set are included, although one was still attached in the pic. $50 plus shipping for this set.
Shipping would be from PA 17086. Post or PM
THIS SET IS SOLD[/B] #1 back up lamp set has dent and ding free stainless bezels that have been buffed for show. Lenses are very nice, and internal sockets are good. The pigtails are not damaged, but the back side of the housings have pitting, and 1 socket has some small rust holes. These holes came from the surface rust outside. You may be able to use it as is, and just seal those small holes with sealer, or repair them with weld. $65 plus shipping for this set.
#2 does have some very small dents on the stainless bezel of one and rub indent marks on the other one. The internal and external housings are in nice used condition. The sockets and pigtails are nice and undamaged. $60 plus shipping for this set.
#3 stainless bezels are decent with only a notable ding on one and small imperfections on the other. The internal sockets appear to be OK on both, but one has part of the flange piece missing, although it stays in place as is. It also has the boot for the pigtail rolled back, and will need some heat applied and rerolled back on. The other one in this set has a good crack in the socket boot and wire insulation on the pigtail. Both lens gaskets for this set are included, although one was still attached in the pic. $50 plus shipping for this set.
Shipping would be from PA 17086. Post or PM
Attachments
Last edited:
