• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Ballast Resistor

John H

Well-Known Member
Local time
10:05 AM
Joined
Mar 11, 2023
Messages
59
Reaction score
17
Location
Bridgewater, Mass
Multiple people have told me to buy a spare Ballast Resistor because they can fail. Can anyone tell what would be the correct resistor & (Part number) for my 1967 Dodge Coronet 440 with a 383 in it? And where to buy it?
Thank You.
 
Should be 2095501 0.5Ω-0.6Ω
Are you running an original style points distributor?
 
Single or double, and part number on the ECU they are matched ohm wise.
 
i'm pretty much stuck on the msd .8 ohm. they've been far more reliable than others i've tried.
 
Here is a picture of it. @HALIFAXHOPS

Resistor.jpg
 
Last edited by a moderator:
Single .8 ohms is what you want I have some if needed. NORS
 
Auto Transport Service
Back
Top