battery hold down

[Dakotaacres]

anyone have a picture of what the battery hold down looks like on a 68 charger? I got an idea at how it is attached on the engine side but not the fender side.

 

[BeepBeepRR]

This is supposed to be an untouched survivor car.
https://cdn-0.barnfinds.com/wp-content/uploads/2018/07/68-Dodge-Charger-2.jpg

 

[Dakotaacres]

This is supposed to be an untouched survivor car.
https://cdn-0.barnfinds.com/wp-content/uploads/2018/07/68-Dodge-Charger-2.jpg

OK, that makes sense now. thanks

 

[turbine68rt]

There's a hole above the tray for the rod to hook into.

 

[sabre67]

Long hold down bolt on tray for inside, short hold down bolt on inner fender for outside

 

[toolmanmike]

Long hold down bolt on tray for inside, short hold down bolt on inner fender for outside

Bolt length is the other way.

 

[turbine68rt]

Bolt length is the other way.

Sabre is correct. 8 3/4" for tray, 6" for fender.

 

[toolmanmike]

Long hold down bolt on tray for inside the engine compartment, short hold down bolt on inner fender

Fixed

 

[toolmanmike]

Sabre is correct. 8 3/4" for tray, 6" for fender.

It's the inside/outside thing that sounds confusing.

 

[sabre67]

Sorry to confuse

 

[toolmanmike]

Sorry to confuse

 

[Richard Cranium]

Here's the one in my survivor....

 

[toolmanmike]

Here's the one in my survivor....

View attachment 1010815


View attachment 1010816

Hey, your Mopar Battery would look good with one of these:https://www.forbbodiesonly.com/moparforum/threads/battery-topper-kit.195930/