• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB Bucket Seat Hinge Bolt

Status
Not open for further replies.

Toxic Orange 493

FBBO Gold Member
FBBO Gold Member
Local time
11:32 PM
Joined
Apr 29, 2010
Messages
530
Reaction score
2,621
Location
PA
Feedback: 6 / 0 / 0
I am looking for one hinge bolt for a 68/69 style bucket seat. I need one like pictured below.
E098443D-EDC8-40DA-8379-0070E945A2A9.jpeg
 
Thank you for the link. They say for 70-74. Are they the same for the 68-69 seats?

Also that link show washers with the bolts. My seats did not have washers on them, should they?
 
I bought them for a 66. They are all the same I believe. I think somewhere I read the later seats started using the washer as a wear protection to the vinyl.
 
Here is a bolt from a 1968 bucket seat, next to 1967 bolts. They used a fiber washer between the vinyl and the seat back arm.

The 1967 seats have these same fiber washers between the vinyl and seat back arm. And them a thick washer under the bolt head.

77B41C42-A3B3-4B0C-A3B4-0C8E95524BA5.jpeg 01D1ECE6-5754-4555-9739-3FF2DEAF8C98.jpeg
 
Status
Not open for further replies.
Auto Transport Service
Back
Top