• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Carter 4682S Carburetor - 1969 383 HP Auto Trans

Status
Not open for further replies.

John B

Active Member
Local time
3:04 AM
Joined
Nov 16, 2019
Messages
43
Reaction score
27
Location
Fresno, CA
Feedback: 4 / 0 / 0
Contact seller
I have a decent rebuilder that was on my 69 Charger non HP car when purchased. This is the correct carb. for a 69 383 HP w/ auto transmission and my car was an SE with the 383 330 HP w/ Holley Carburetor from the factory so this is up for sale. I did run it but it needs a rebuild as I can't vouche for it. I did purchase the original SS fuel lines for this carb. before I realized it was incorrect so I will include them, it is from the pump to carb. with fuel filter mounted low as original. I'm asking $200 OBO plus the ride, I will need you city and zip to calculate shipping. I only charge actual shipping and I take PayPal. Thanks!

IMG_4568.JPG
IMG_4569.JPG
IMG_4570.JPG
IMG_4571.JPG
IMG_4572.JPG
IMG_4574.JPG
IMG_4575.JPG
IMG_4576.JPG
IMG_4577.JPG
 
That’s 1 good looking carb even though it is not an Edelbrock carb.
 
Hi John,

Is you car an A/C car? Chrysler did different stuff for A/C cars, one of which was a Holley in 69 and turquoise engine paint.
 
Kind of a weird deal from Mopar, it is an SE w/ a 383 330 HP #'s matching engine but it is an H code car on the VIN, tag and build sheet. From what I have been able to determine, the 383 4 barrel 330 Horse was in the SE models and came with turquoise paint because it wasn't the HiPo engine, it doesn't necessarily mean it had A/C or cruise control as some have stated. The build sheet on this car called for the 38 code, a Holley R4440. It also came with the dual snorkel air cleaner that has the round openings, breather on the tube and the smaller center that doesn't take a pie tin. It had a steel crank and I have added a roller cam, recurved the dist., forged pistons and a wind-age tray. The cam profile is better then the HP so it has a nice rumble and performs well but still in the break in so haven't really tested it to the fullest yet. Here's a pic of the restored engine compartment.

IMG_5840.JPG
 
This is tempting. This Carb is the same part number found on my numbers matching 69 Road Runner, 383, 727.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top