Clips for front valance above bumper

[Stowe]

Hello
Looking for a source for the clips circled in the photo , that attach to the top side of the stainless valance on the lower support rail on 66-67 charger . Thanks

 

[67 Mopar]

A little easier to see here perhaps.

 

[toolmanmike]

Hello
Looking for a source for the clips circled in the photo , that attach to the top side of the stainless valance on the lower support rail on 66-67 charger . Thanks

View attachment 1893855

Those may not be reproduced. You may have to start a Parts Wanted ad to find some used ones.

 

[67 Mopar]

I know these guys have always helped me out in the past when trying to find pieces of unobtainium. They have a lot more stuff on hand than they can illustrate in their catalogs etc., so I have always sent them a few pics of what it is that I'm looking for. I also include measurements in the images to assist in identification. I can get the pics and measurements for you if you don't have any pieces on hand.

Welcome to Restoration Specialties - A first class restoration depends on quality products

Send pics to:
info@restorationspecialties.com

 

[Maxrat]

Hello
Looking for a source for the clips circled in the photo , that attach to the top side of the stainless valance on the lower support rail on 66-67 charger . Thanks

View attachment 1893855

I noticed the hood release cable -- so I suspect you have a 1966 Charger. The 67 didn't have one. Noting that, the hood release cable should not be in the clip above the brake master cylinder. If you're restoring it to look original, I think that's a 1967 windshield washer reservoir.

 

[Stowe]

Yeah thanks I just hung it there for now I waiting on other clips . The reservoir who knows it was in a box of parts when I bought a couple of Mopar’s . This is basically a nut and bolt restro along with all mechanicals . Building as a day 2