Connecting rod

[Hossbee]

Need some help. I have some H beam connecting rods with .990 pin size. My pistons wrist pin size is 1.094. Can the connecting rods be machined to 1.094?

 

[cryplydog]

I wouldn't, you need to get pistons with a .990 hole or get the mopar 1.09 size rods and sell the others. My opinion only. good luck

 

[Hossbee]

Ok I appreciate the reply.

 

[727]

So what are going to sell, the Pistons or the rods?

 

[Hossbee]

Not sure yet. Have a set of standard 4.320 l2295 piston. Trying to see which way gonna go.

 

[Mike67]

I would keep the rods and ditch the pistons, a lot better offerings out there and you'll be able to tailor somewhat to your build compression wise...