Console

[steve from staten island]

RC is trying to help me with this but im just not getting it. The console rug piece that has the vinyl on each end. I was told it goes around rear of console on the sheetmetal end part? I can see were it was glued but how and were dose the vinyl get attached to. Im lost with this. Any help/pictures are appreciated. Thanks!

 

[moparnation74]

The vinyl wraps around the the front outer edges. Each metal tab has a hole and take an ice pic and such through the vinyl. Then install the unit with the original screws. Just be careful just make them snug. You can easily break the plastic, if it isn't already broken there because a lot of consoles have that problem....