easyrider
Well-Known Member
Who is reproducing sheet metal for 65 Plymouth Satelitte? I need the cowl corner drivers side. Actually, can anyone give me other sources for purchasing parts for my car?? A catalog to look through would be great.
Cowl corners
- Thread starter easyrider
- Start date
Dodge 330
Well-Known Member
The newer reproductions like the trunk floor through AMD are really good reproductions.
The patch panels for the front fenders, rear quarter wheel openings and cowl patch are pretty poor quality that Sherman & Associates sell but they are better than nothing.
Best bet if you have lots of rust is to find a good 4 door donor car.
The patch panels for the front fenders, rear quarter wheel openings and cowl patch are pretty poor quality that Sherman & Associates sell but they are better than nothing.
Best bet if you have lots of rust is to find a good 4 door donor car.
Satellite65
Well-Known Member
Kramer Automotive. That's where I got my drivers side cowl corner. It was a while back but it wasn't a bad piece. Depends on how much damage your car already has. If I recall, it didn't cover too much area so if your rust is extensive You'll either haver to finish it with filler pieces or get a full cowl from a donor car (will more than likely have rust as well). I had to make my own inner cowl pieces.
Similar threads
- Locked
