FOR SALE CRT, 727-904 Cope Pro Street Manual Reverse Valve Body, New

[JackpotJim]

I have a brand new Cope Racing Transmission CRT-2 Reverse manual valve body 140 psi with low band apply for street cars. Low band apply will give extra sprag protection and will have engine braking in 1st gears. This valve body will have very firm clean shifts. Each and every valve body is fully assembled by John Cope to insure the highest quality you have come to expect from CRT. Requires low reverse billet servo kit. Fits 1966-1980 727s & 904s Shift pattern P R N 1 2 3 The difference between the STREET-2X valve body and the RACE -22X valve body is the pressures are set higher for the RACE valve body over the STREET valve body, other than that , they are the same. $300.00 Comes with instructions & core slip so you can send your old 727 valve body in for a $50.00 refund from CRT. $17.00 shipping in CONUSA Message me with questions or more photos.

 

[67charger383]

Is it for a 66-71 727? Because on the crt website the red valve bodies are for pre 66 727s only. Or is it just an older version. Can you give me an exact part number? Thx

 

[JackpotJim]

Is it for a 66-71 727? Because on the crt website the red valve bodies are for pre 66 727s only. Or is it just an older version. Can you give me an exact part number? Thx

Sorry for the late reply, Just happen to see your question. Cope part number is PSRM-2, I've had it a little less then a year. I believe the newer valve bodys are blue now.