FOR SALE "H" slider guides for 32230 glass division mylars.

[dadsbee]

EXACT reproductions of the "H" slider guides, for the 2932230 door glass division mylars. Skip the fight on the glass installation and make it go easy, so you don't wreck those expensive mylars with incorrectly sized guides that are WAY too tight. $45 US shipped for 5 sets. One extra set in case you lose one or for a desk ornament! The junk in kits can be used on rear flip out Coupe windows.

PM me... PayPal as merchandise only.

 

[440 4 speed]

EXACT reproductions of the "H" slider guides, for the 2932230 door glass division mylars. Skip the fight on the glass installation and make it go easy, so you don't wreck those expensive mylars with incorrectly sized guides that are WAY too tight. $45 US shipped for 5 sets. One extra set in case you lose one or for a desk ornament! The junk in kits can be used on rear flip out Coupe windows.
View attachment 1848103View attachment 1848104View attachment 1848105View attachment 1848106View attachment 1848107View attachment 1848108

PM me... PayPal as merchandise only.

Very happy you have done this Wayne!

 

[Project66]

Sorry, I can't PM. The site says "You have reached the limit (15) for conversations." When I try to contact admin, I get the same message.

Anyway, do those sliders fit a '66 hardtop?

 

[dadsbee]

Sorry, I can't PM. The site says "You have reached the limit (15) for conversations." When I try to contact admin, I get the same message.

Anyway, do those sliders fit a '66 hardtop?

You need to empty out your conversations, how is shown here >> How to delete conversations from your inbox...

As for 66's, 66 and 67 used a flocked H slider that is not reproduced by anyone... but it is my understanding that the plain plastic ones we've duplicated here work just fine for '66 through '70.

 

[71RRHI]

Pm sent

 

[Project66]

You need to empty out your conversations, how is shown here >> How to delete conversations from your inbox...

As for 66's, 66 and 67 used a flocked H slider that is not reproduced by anyone... but it is my understanding that the plain plastic ones we've duplicated here work just fine for '66 through '70.

PM sent. Thanks for the primer on how to delete conversations.

 

[dadsbee]

Guess I'd better get #1 Son going on printing more..

 

[440 4 speed]

You need to empty out your conversations, how is shown here >> How to delete conversations from your inbox...

As for 66's, 66 and 67 used a flocked H slider that is not reproduced by anyone... but it is my understanding that the plain plastic ones we've duplicated here work just fine for '66 through '70.

I have used plain plastic ones, don’t remember what they came out of. They are the same as Wayne’s.

 

[BDnFL]

PM sent

 

[dadsbee]

Well that was quick, I'm out, guess we should have charged more!! LOL. Gotta wait for #1 Son to get home on Sunday to start making a few hundred more and get some more pins on order! Keep the orders coming, so we know how many to mfg and so I can get them out before heading North for Camp in the next few weeks for the Summer!!

 

[RemCharger]

Wow quick is right !

 

[T2R9]

I will take a set.

 

[moparbob71.2]

My 69 doors are completely apart
I dont know what I need when I put them back together
Do I need these?

 

[kiwigtx]

Temporary Sticky to help gather orders Wayne. I'll give this a couple of weeks.

Such a small but extremely hard to find item for many cars on this site....and likely others.

 

[dadsbee]

My 69 doors are completely apart
I dont know what I need when I put them back together
Do I need these?

Depends what shape your original mylar and plastic sliders are in. Sometimes the sliders are still good, most times they're baked and cracked. I gave up on vacuum forming the mylar strips back during covid when I couldn't get the correct material to form them consistently, but the current reproductions available from DMT, Megaparts, etc, work pretty good. The plastic sliders that come with them are close, but still not dimensionally correct.

That said ANY vintage or combination of these 32230 mylar strips and sliders aren't a Wam Bam Thankyou Mam installation. It takes finesse, a spotless clean vent frame channel, the sharp edges filed off of same so you don't rip your mylars, lube of choice and a few prayers to make them slide nice.

 

[dadsbee]

All orders that were paid for were shipped Thursday, Project66's went out today. You should all have a tracking #!

I do have other orders, will request payment when #1 Son fires up the machine.

Thanks!

 

[71RRHI]

Thanks Wayne. Mine will be here next week.