• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Has any one tried these?

Another hoax. It's like the fans mounted in a spacer plate. A carb is going drip gas with out air velocity to atomize it.
 
Just curious if anyone here has seen or tried these


Anytime you can atomize fuel into smaller molecules the response is bound to be better. That's the theory with fuel injection and it works quite well. Gasoline that is squirted in a stream has to evaporate into a gas, coats everywhere before evaporation and is really uncontrollable in it's change from liquid to a gas. The finer the spray the better the A/F ratio becomes as the mix of air and gas takes place. For the price it's definitely worthwhile, to condemn it right off the bat is the symptom of a closed mind and that's not how progress comes about.
 
5ce540fc516210fd5520817c7f30e170.jpg
4118c9f0a390cdb4523564b9346c07dc.jpg

They look easy enough to make yourself out of a piece of metal.
 
The reviews I read say it's ONLY good on acceleration. Only good for each squirt of the accelerator pump.
 
For sale: original '69 hemi GTX numbers matching factory right front tire air.
 
WOW! Another miracle. Why did it take so long for engineers to figure this out?
Add the "tornado" and the fuel line magnets to this and you've really got something.
 
Carbs do a pretty decent job in cruise mode as the gas isn't really dripping but is being pulled out by the pressure drop in the venturi. It is more of a mist which will become a vapor more easily than when it's being squirted in by the pump squirter on accel when you step on the pedal. One of the reasons why high performance Holleys suck (no pun intended) so bad in city driving but can and do pull down decent mileage on the hiway IF you can keep a steady food on the pedal.
 
I consider myself very optimistic but at the same time a realist, to me after all of these years certainy this has been tried but who knows. Let us know how it works.
 
I tried those the holes didn't line up with the shooter holes and it bogged so bad I tossed them what a waste of money! your better off just up sizing your shooters!
 
Auto Transport Service
Back
Top