long shot- A833 4spd

[blackblazer717]

Looking for a used b/rb bell housing and a A833 4spd. Usable condition. 18 or 23 spline. Let me know if anyone can help me out with this
Luke

 

[moperformance]

10 1/2 or 11"?

 

[blackblazer717]

Doesnt matter!!! Whatever anyone has ill make it work., i dont have a flywheel yet. im trying gather everything to put a 4spd back in my 74RR over the winter. Some idiot decided they wanted a 727 in it. All i have is a cross member, driveshaft, and the pedals.
Thanks again guys
Luke

 

[challengerz]

4 speed set up, tranny,bell housing,fly wheel ..

these set up was taking out of a 69 RR the car was running. these parts were taking out and put away in the mid 90"s ... also have the B&M shifter mechanism and rods if you need it . tranny, bell housing,fly wheel $450.00..let me know ....thanks ..Jorge.

 

[MEC7]

Do you still these parts? Please PM me.

 

[dla4567]

I have a a833, bell housing (11" iron I think), flywheel, shifter and rods somewere in the garage. I am currently in the proccess of cleaning the garage and will dig them out and check condition if anyone is interested. I am 30 miles north of Pittsburgh PA. Haven't been on that side of the garage for years, who knows what I might find.

 

[Moparparts]

If you are going to be using a console in that 74 RR you will need a trans with the 2 shift mount locations on the tail housing to use the rear one

 

[MEC7]

How about if I am using it in a 68 Coronet which was originally a 273 engine with automatic? Need a console for it as well if they exist. Anyone know?