Looking for Schumaker torque strap!

[James Huie]

I’m sure everyone is looking but I’m helping my brother build a 68 satellite/roadrunner clone. 440 automatic. So please advise

 

[GetX'd]

Very tough to find. I thought the guy that made these stopped some time ago due to poor health. I got lucky and bought one from him before they became Unicorns. You probably need to post in every “Want to Buy” that you know of. I don’t know how else you’d get one….. Someone needs to pick this product up - buy the patent if necessary. So many want them. It was just what the Dr ordered for me at the time.

 

[6PKRTSE]

Not hard to make your own with some tubing, a tap and die set and a couple of r.h./l.h. heim joints and jam nuts.

 

[Fran Blacker]

US Car Tool bought his business and supposedly engine adapter mounts. Maybe try their website and or call them see if there making them. You could throw a little BS that people have/are looking for them. It isn't totally BS.

 

[matthon]

Drill a hole through the entire mount, put a bolt in with a lock nut, tighten just shy of tight.

I put one on both sides, because believe it or not, the engine will still want to push down on the passenger side.