Looking for smaller tire.....

[RON LAPIANA]

I`m running mickeys sportsman 33x17.5 in a tubbed 65 ply.dana 60.....not a good tire for drags...looking for 29x12...or 14 with rim that will bolt to dana....must be a deep rim...5 on 4.5...thanx

 

[Stumper]

How about a like new set of 28 x 14.50 x 15 Hoosier Quick Time Pros on Weld 15x12" Draglites - with Hoosier drag tubes? PM me if interested and I can send you more detail and pictures.

 

[RON LAPIANA]

Stumper....i`ll get back to you

Will welds fit dana 60 bolt pattern.......i`m tubbed with narrowed dana....and how odd will it look...

 

[Stumper]

Dana didn't have a particular bolt pattern. This was determined by the axles and usually the axles were determined by the car. If this is a 15" Mopar is is likely a 5 lug x 4.5" spacing which is typical Mopar, is just what these were on. The Weld wheels will fit on a 5x4.5" pattern or a 5x4.75" pattern - they are somewhat universal in that respect. This set was in fact on a Mopar with a shortened / tubbed Dana 60 rear end on my 62' Plymouth. They have a 4.5" back space and the tires of course are 14.5" at the cross section. You will need to determine if this will work for your car. If you are running 17.50s right now I doubt there will be a clearance issue but you may have some extra space in your fender well.

 

[RON LAPIANA]

Stumper...about those tires..

On that dana 60...i put the disk brakes and junk off of a 1973 chrysler labarron...all of it a direct bolt on....i wonder how funny it would look .....with all that extra space...back attcha...

 

[RON LAPIANA]

Stumper...about those tires..

how about a like new set of 28 x 14.50 x 15 hoosier quick time pros on weld 15x12" draglites - with hoosier drag tubes? Pm me if interested and i can send you more detail and pictures.

i`m thinking they might fit......i have discs brakes on my dana....will that present any problem,,,,,then theres shipping your price..lions..tigers..and bears.....oh my,,,,,,,,,