68 coronet
Well-Known Member
I need a 2 groove crank pulley for a 383.
Both grooves must be 6 1/2'' in diameter.
This is for a 1965 engine with power steering and no a/c
I bought one that is 6 1/2 on the back groove and 7 1/4 on the front groove and it will not work for me.
Both grooves must be 6 1/2'' in diameter.
This is for a 1965 engine with power steering and no a/c
I bought one that is 6 1/2 on the back groove and 7 1/4 on the front groove and it will not work for me.
