MACHINED FIXTURE FOR YOUR 426 HEMI REAR MAIN SEAL

[1964 b body]

Can any body tell me if they know of any supplier that sells this item. I am looking to buy one not the aluminum one that comes standard. I have been told that the racing folks use them. Thanks in advance.

 

[toolmanmike]

Try Mancini

 

[Darter6]

Also Indy Cylinder Heads

 

[1964 b body]

Thanks Guys good info.

 

[dvw]

This race guy uses the stock main seal carrier. It and the bolts that hold it down are the only production parts on the entire motor. Never leaks a drop.
Doug

 

[jamie]

This race guy uses the stock main seal carrier. It and the bolts that hold it down are the only production parts on the entire motor. Never leaks a drop.
Doug

And leave those dumb side seals out,let the seal center itself. Fill those voids with silicone. Leaks will be gone.

 

[zyzzyx]

Yes, I've read on-line that some of the seal housings don't center the seal to the crankshaft
and that's what causes them to leak. Thanks for the tip on leaving the side seals out! Might
just make the difference.

 

[1964 b body]

Thnks to everyone who responded to my request. Ordered it from Mancini yesterday.

 

[6PKRTSE]

This race guy uses the stock main seal carrier. It and the bolts that hold it down are the only production parts on the entire motor. Never leaks a drop.
Doug

Yes, same here on my engines.