• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Milodon 10 qt Oil Pan & Pick Up - FS

Status
Not open for further replies.

Stumper

FBBO Gold Member
FBBO Gold Member
Local time
9:39 PM
Joined
Oct 28, 2010
Messages
1,590
Reaction score
391
Location
Bandana, NC
Feedback: 0 / 0 / 0
Contact seller
I have for sale this Milodon oil pan and pickup that is for pre 65 big block / hemi cars. The pan holds 10 qts of oil and the pickup is the swinging arm type that follows the oil to the rear on take off. I put a different pan & pick up on my car and do not need this any longer.

Some un-named dummy took out his lower control arm bumpers and drove the car hard causing it to bottom out and create a leak at the rear edge. Went ahead and had someone weld a piece of 3/16" skid plate on the rear section to close the hole and give it some extra bracing. The bottom was cleaned and painted black to make it look purdy.

This is the type of pan used on the old SS cars where the center link passes through the pan tunnel.

Oil Pan part number is Milodon #31420 and sells for $379.95 at Summit
Pick Up is Milodon #21330 and sells for $124.95 at Summit.

I'll deliver them to you in the US for $250. I have some other pictures too for the asking.

SDC11814.gif

SDC11812.gif

SDC11816.gif
 
BTT 1/2 the price of a new one guys! Any interest? Will bring to the Mopar show at the Rock for $200!
 
BTT how about $225 delivered to CONUS??
 
If less than half price isn't reasonable for this pan what is??
 
BTT for the year end!! Anyone wanting to go with a high volume pan and swinging pickup this is the deal for you. The new set is $500, this one will go for $200 plus the ride...
 
Oil pan and pickup have been sold - please delete the thread!
 
Status
Not open for further replies.
Auto Transport Service
Back
Top