• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD Mopar Transmission Parts.

Status
Not open for further replies.

Beeaurell

Member
Local time
11:48 PM
Joined
Jul 23, 2011
Messages
19
Reaction score
0
Location
Merced, California
Feedback: 0 / 0 / 0
Contact seller
image.jpgimage.jpgimage.jpgimage.jpgimage.jpgPlease research and double check your application for these parts. Any questions feel free to message me. Items sold as is, no returns, no warranties, and no refunds. All prices listed are firm and lower than what I paid. Prices do not include shipping and I'm not trying to make money on shipping. Items are in Merced, Ca

I have sold my 1968 coronet project car. It was a automatic car. I was going to convert it to 4 speed but decided to sell the car. I have to many unfinished projects.

I bought all these parts for the conversion. All are used, inspected, and was all put together with my transmission. I am keeping the transmission for my other project. The Centerforce clutch package is new and never been ran only assembled.

Bell housing has three repaired threads and are very solid. Repaired threads are the two lower transmission holes and the lower starter hole.

Flywheel has been resurfaced and balanced. Overall parts are nice, solid, and ready for install.

I would like to sell these items all to one buyer for $700.00 with free shipping. If you're interested in the whole lot please let me know before I start selling items separately.

$285.00 Original 11" big block bellhousing to fit 383-440 1968 B-body (4-speed only), cast #2892262, 4.805" bearing retainer diameter. Media blasted, primed, and painted with mopar restoration Hemi orange.

$70.00 Dust cover for 11" big block bellhousing, steel, with some pitting. Media blasted, primed, and painted with mopar restoration Hemi orange.

$95.00 Reconditioned flywheel, original 11" 143 tooth ring gear, balanced, resurfaced, ring gears inspected, ready to install.

$285.00 (OUT OF BOX) CDF1118 CENTERFORCE DUAL FRICTION 11" 18 SPLINE CLUTCH PKG

Centerforce Dual Friction 11.0” clutch disc and pressure plate to fit all applications with 143 or 172 tooth 11.0” flywheel and 18 spline input transmissions. 90% more holding power than stock Borg & Beck clutch with lighter pedal effort, be advised that the clutch pedal overcenter spring will need to be removed for proper operation.

Like I mentioned this is a new clutch package and as with all performance and racing parts there is no warranties.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top