• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

motor mount bolts

jts

Well-Known Member
Local time
4:55 AM
Joined
Sep 14, 2016
Messages
79
Reaction score
18
Location
nc
1967 coronet 440 motor. Was wondering why that one side of rubber motor mount bolt hole is 5/8 " and the one with the nut welded on is 7/16 in. Does this take a special shouldered bolt for the rubber mount to k frame. Mine only had 7/16 in. x 3 3/4". Is the 5/8 hole for ease of alignment. Don"t seem right that a 7/16 bolt through a 5/8" hole. Someone please enlighten me on this. Thanks, jts
 
Auto Transport Service
Back
Top