- Local time
- 4:46 AM
- Joined
- Dec 10, 2013
- Messages
- 440
- Reaction score
- 393
- Location
- West Central Indiana
New Precision Engine Parts 4340 4.25" stroke crankshaft for 2.75" RB mains, 2.200" Chevy rod journals, Bullnose counterweights, 6-bolt flange, 6.700" minimum rod length. In a .030" over block (4.35") this crank will make 505 cubic inches. With .055" over block (4.375") it makes 511 cubic inches. This crank was manufactured with Big Block Chevy rod journal width to allow use of off the shelf BBC rods. Pilot drilled for automatic or manual transmission use.
Please note: Crank for a RB block and will not fit in a low deck 383-400 B block unless you want to do some machining.
This is a very nice crank for the money and is available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the 48-states for $795. This is $220 less than a 440 Source crank delivered would cost. Or pick it up in 47807 for $700 cash. I now only accept PayPal Friends and Family, Bank Check, or Personal Check with time allowed for check clearance.
Thanks for looking,
Tom
Protective coated paper on the journals in the photo below comes right off with ease. I took off a few journals worth off for show purposes.
Please note: Crank for a RB block and will not fit in a low deck 383-400 B block unless you want to do some machining.
This is a very nice crank for the money and is available to ship within 24-hrs. of payment on business days. I can sell this delivered to your door in the 48-states for $795. This is $220 less than a 440 Source crank delivered would cost. Or pick it up in 47807 for $700 cash. I now only accept PayPal Friends and Family, Bank Check, or Personal Check with time allowed for check clearance.
Thanks for looking,
Tom
Protective coated paper on the journals in the photo below comes right off with ease. I took off a few journals worth off for show purposes.
Last edited:
