- Local time
- 5:03 AM
- Joined
- Dec 10, 2013
- Messages
- 440
- Reaction score
- 393
- Location
- West Central Indiana
Contact seller
New Precision Engine Parts 4340 4.25" stroke crankshaft for 2.75" RB mains, 2.200" Chevy rod journals
Bullnose counterweights, 6-bolt flange, Pilot drilled for manual or automatic transmission use.
Bobweight is Pre Balanced to 2550 grams.
In a .030" over block this crank will make 505 cubic inches. With .055" over block it makes 512 cubic inches.
This crank was manufactured for use of off the shelf BBC rods. 6.700" minimum rod length.
Made in the same foundry that 440 Source, Scat, Eagle and every other off shore crankshafts comes from.
Still has the oil soaked protective coated paper wrapped around the journals. (I have a Precision Engine Parts 4.15" stroke crankshaft in my 499" RB.)
With the latest price increases PEP & 440 Source crankshafts are now $1003 delivered. $725 Picked up in Terre Haute, IN 47803
Thanks,
Tom
Bullnose counterweights, 6-bolt flange, Pilot drilled for manual or automatic transmission use.
Bobweight is Pre Balanced to 2550 grams.
In a .030" over block this crank will make 505 cubic inches. With .055" over block it makes 512 cubic inches.
This crank was manufactured for use of off the shelf BBC rods. 6.700" minimum rod length.
Made in the same foundry that 440 Source, Scat, Eagle and every other off shore crankshafts comes from.
Still has the oil soaked protective coated paper wrapped around the journals. (I have a Precision Engine Parts 4.15" stroke crankshaft in my 499" RB.)
With the latest price increases PEP & 440 Source crankshafts are now $1003 delivered. $725 Picked up in Terre Haute, IN 47803
Thanks,
Tom