• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

WTB rear window trim

Status
Not open for further replies.

jts

Well-Known Member
Local time
9:05 AM
Joined
Sep 14, 2016
Messages
79
Reaction score
18
Location
nc
Feedback: 0 / 0 / 0
in need of back window vertical left moulding for 1967 dodge coronet 2 door. This moulding is 24 7/8 in. long. Thanks, jts
 
Last edited:
I have three pieces of rear window trim from a 66 Belve more door Left side is there need it?
 
drivers side, rear window upright piece of moulding 2 door. Don't know if belvedere is same or not. Could someone verify that please?
 
On the rear window mine is like a l up the side and on to the middle of the top.
 
Sorry, that don't sound like it will work. jts
 
in need of back window vertical left moulding for 1967 dodge coronet 2 door. This moulding is 24 7/8 in. long. Thanks, jts
Is it a hardtop or Sedan? I probably have the pieces!
 
it's a coronet r/t, should be a hardtop. it does not have a post.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top