Small Block Water Neck Spacer

[hunterrocks24]

Hello Everyone!

I currently have a 318 with a edelbrock LD340 intake on it. It has a port for a 1/8 npt gauge which I tried to make a t for. One side analog gauge (factory) and the mechanical gauge. That doesn't seem to be working. I see people have suggested using a water neck spacer but am seeing only small block chevy, big block chevy, and big block mopar. Any ideas or something that worked for you in the past? Thanks everybody!

 

[R413]

The Sb mopar are the same water neck as a bb mopar so see if it will clear your intake runners.

 

[rumblefish360]

I grabbed one from Summit Racing, a company called Joes racing products… or something to that effect.

 

[Chi Town Runner]

Take a look at this.

http://arengineering.com/products/thermostat-spacer-with-efi-sensor-port/

It may be what you need.

Good Luck
Frank

 

[Chi Town Runner]

Is the distributer in the front or back....?

Sorry, wrong post for this response

 

[hunterrocks24]

Thank you everyone. I ended up buying a small block chevy riser for the neck. Let's hope for no leaks! Thanks guys!

 

[oldkimmer]

Did it fit? What part number did u get. Thanks. Kim