super stock spring questions

[cj's mopar]

Hi i am looking at putting new springs on my project 69 m21 superbee
the questions i have are as follows :
1.what would the ride height difference be between the extra heavy duty mp springs and the 3800lb SS springs ?
2. will SS 3800 lb springs be a good choice for my street /strip full interior . superbee ?
3.Why does the Mancinis web site say SS 3800 for auto trans is there a part number for 4speed ?
4. ARE there any other companies other than MP that makes super stock style springs for my 69 bee with hemi 4 speed ?
thanks for the advice in advance Cj .

 

[Coronet 500]

Check this out. http://forbbodiesonly.com/moparforum/showthread.php?p=99581

 

[cj's mopar]

good info but still does not answer the exact questions i need to know .
Any body else have the answers ?

 

[72Satellite440]

Id suggest going to your local specialty spring store and ordering them there or getting them to install - and let them know what height you want ..
they can reassemble your current springs, add extra or order the correct ones...

 

[Cranky]

Id suggest going to your local specialty spring store and ordering them there or getting them to install - and let them know what height you want ..
they can reassemble your current springs, add extra or order the correct ones...

This is what I do or modify them myself. I hate SS springs to be honest. For one, they ride too rough for street driving in a lot of cases. I also don't like the extended front hangers that you have to use for everything besides an A body and if you get too much height, you have to take them to a spring shop anyways to get them 'adjusted' or hassle with sending them back while your car sits up...no pun intended.