Trans Bolts

[milit73]

Hey guys I am getting ready to bolt my trans to my engine but do not have the bolts to do so. Is there a place to buy a set for this or does someone know what size and grade I need to do this? Thanks Jim

Almost forgot 1968 Superbee with a 383/727

 

[5.7 hemi]

3/8 grade eight, not sure of the length.

 

[69Bee]

3/8"x16 grade 8 as stated above (from Lowes-Home depot-Ace etc), and just make sure that they exit past the bellhousing at least 1" for good thread engagement.

 

[Meep-Meep]

Even grade 5 is fine. I'm pretty sure the factory used grade 5 and I know I have without problems. I want to say length is about 1.250" but like it says above, check it.