WTB Trunk Light Switch

[PurpleBeeper]

I think I may have broken my trunk light switch (70 Roadrunner). It screws into a little tab on the inside lip of the trunk & has a little "L" connector. Does anyone have an extra one?

I "think" I saw somewhere that 66-70 could work....but that's not confirmed at all. I would "guess" that C-body & A-body might be the same too??? Driver quality is just fine.

THANKS FOR THE HELP!

 

[moparnation74]

I know 68-70 are the same......Search Ebay.....

 

[Daves69]

...& A-body might be the same too???...

A picture of my A-body switch if it helps…….

 

[PurpleBeeper]

I know 68-70 are the same......Search Ebay.....

Oddly enough, I didn't find one on Ebay & didn't see a reproduction either online. I don't think this part is very rare or wears out too often....but mine is broke. I guess I might get lucky in a salvage yard?

 

[BeepBeepRR]

Let me check my Belle.. I might have what you need. Im not going full OEM resto anyway.

 

[PurpleBeeper]

A picture of my A-body switch if it helps…….
View attachment 677539

Thanks Dave, it sure "looks" like the same switch in your A-body. In an online search, it "looks" like only the E-body ones are different (some sort of mercury tilt-to-light up thing...like a house thermostat...looks cool).

 

[moparnation74]

Oddly enough, I didn't find one on Ebay & didn't see a reproduction either online. I don't think this part is very rare or wears out too often....but mine is broke. I guess I might get lucky in a salvage yard?

Theres 2 on Ebay....one is a little pricey........The other has been cut.....

@Moparparts Maybe Don can hook you up...

 

[Crider]

I can confirm that an A body is the same. Just replaced the one on my car

 

[BeepBeepRR]

Just pulled it out of the Belle. 66 Belvedere just so you know.

 

[PurpleBeeper]

Theres 2 on Ebay....one is a little pricey........The other has been cut.....

@Moparparts Maybe Don can hook you up...

I looked again and couldn't find those. I did find this NOS one for $20 from a late 50's/early 60's Mopar. It would work if the diameter of the threaded section is the same diameter. Anyone know?

 

[PurpleBeeper]

Just pulled it out of the Belle. 66 Belvedere just so you know.

View attachment 677542
View attachment 677543

Thank you! Yep, without measuring it, it sure looks like my broken switch. So it seems like the '66+ plus A-bodies (& probably C-bodies too) would work.

 

[BeepBeepRR]

Send me 10 bucks paypal and this ones yours.. Found one on ebay 22 bucks.. ouch. Does it work I dont know... I can test it to see of it breaks contact.. It moves freely in the case.

 

[PurpleBeeper]

Thanks everyone! I think BeepBeepRR found one for me on ebay. I appreciate everyone's help!

 

[BeepBeepRR]

Read the post above yours.

 

[bigmanjbmopar]

Yeah get the 66 belle one that is the right thread for yours that ebay one looked thin