trying to replace door glass plastic guides

[moperformance]

Does anyone know where can I buy the plastic window guides and hardware? When I removed the door glass everything pretty much fell apart. I haven't been able to find any info or exploded views on the subject.
Thank you very much for help in advance. I do appreciate it!
ps. I placed this request in another thread before finding this one. Sorry for the duplicate I'm still learning.

 

[Propwash]

R/T specialties usually has them.......Classic Industries:

http://www.classicindustries.com/mopar/parts/mn1714.html

 

[dave5237]

Year One was selling them but you will probably pay a fortune.

 

[moperformance]

I have found that the two halves of the "clips" are still good. It's the long plastic piece that runs between the channel and the window. A liner (?) thats falling apart.

 

[Propwash]

Year One was selling them but you will probably pay a fortune.

LOL...Yeah, no doubt. Your parts would be $59.00, and the shipping would come to $54.00 bucks...LOL


Here's a bit more info I seen over at The Dodge Coronet Registry Bill:

http://www.dodgecoronet.com/forum/archive/index.php/t-14087.html

 

[eagleone1983]

I can't remember where I got mine from but I think I paid $50 a piece for them. They were in a Mopar Performance bag so they could probably be bought at any dealership. Make sure you don't chuck your old ones just yet, I had to do some cutting and also punch the holes for them as well.

 

[moparmarks]

http://www.rtspecialties.net/

That where I get mine.

 

[Histoy]

Make sure you don't chuck your old ones just yet, I had to do some cutting and also punch the holes for them as well.

You can use a large diameter leather punch or a paper punch to make the necessary holes. I put the fuzzy strip on the window then use an ice pick to make a small hole through the fuzzy into the center of the hole in the window. Then I remove the fuzzy and use the punch to make a larger, cleaner hole through the fuzzy for the window guide.