• When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

SOLD TTI 2.5" Exhaust

Status
Not open for further replies.

hunt2elk

FBBO Gold Member
FBBO Gold Member
Local time
5:22 AM
Joined
Jul 15, 2009
Messages
10,518
Reaction score
11,660
Location
WI
Feedback: 131 / 0 / 0
Contact seller
I bought this set for my 1969 Road Runner with TTI383-178 headers. The mandrel bent 2.5" H-pipe kit was MWM6870. I welded the collectors to the headpipes. The tailpipe to muffler uses a standard muffler clamp in the hanger, the other 5 joints have band clamps which all come apart because I used antiseize. I installed a bung in each collector for an A/F meter. The mufflers are DynoMax UltraFlows with the extensions directly from TTI as an added cost over the standard Super Turbos. The tips are Accurate Exhaust Plymouth oval stainless steel and still look nice after 3-4000 miles. I cut 4 slots in each muffler outlet to get them apart as gently as possible, it would be easy to weld these back up. $550.00 picked up in west central WI, 100 miles straight east of the Twin Cities.

20230301_112741.jpg


20230301_112754.jpg


20230301_112809.jpg


20230301_112818.jpg


20230301_112822.jpg


20230301_112834.jpg


20230301_112845.jpg


20230301_132939.jpg
 
Last edited:
Nobody needs a good exhaust?
 
Sold, thanks FBBO.
 
Status
Not open for further replies.
Auto Transport Service
Back
Top